Showa MLA Gear Pump |
|
The MLA Series is a Heavy-Duty automatic continuous gear pump. It is designed to be used with control units. A wide range of outputs are available. The MLA can be build on reservoirs from 3 to 80 liters. Motor Options: 100/110V Single Phase 200/220V Single or Three Phase 400/440V Three Phase Notice: Suction Filter should be replaced every 6 months or less. Filter Part Number (52mm): F/1101 An optional Low Level Switch, pressure switch and pressure gauge are available for all models. |
*The "Showa MLA015-FAH" will fit into your existing Bijur reservoir. The below "Bijur V5W Pumps" can be replaced with the Showa "MLA Pump". For specific cross part number, call us Toll-Free (800) 323-3826. | ||||||||||
V5W - D3448, D3598, D3614, D3692, D4014, D2956, D3014, 19645, 21878-1, 24198, 24686, 24697, 26743, D3017, D3249 |
||||||||||
Pump Model Number |
Motor (WxP) |
Theory Rate (cm³/R) |
Discharge Volume (liter/minute) |
Oil Viscosity (cSt) |
Operating Pressure MPa (kgf/cm2) |
Current Rate (A) |
Replacements | |||
50Hz |
60Hz |
200V (50Hz) |
200V (60Hz) |
220V (60Hz) |
Lube Corp | |||||
MLA006 |
25x4 |
0.038 |
0.05 |
0.06 |
20~2000 |
0.3~1 (3~10kgf/cm²) |
0.29 |
0.25 |
0.27 |
AM 102050 102054 102051 102055 |
MLA015
|
25x4 |
0.12 |
0.16 |
0.19 |
20~2000 |
0.3~1 (3~10kgf/cm²) |
0.29 |
0.25 |
0.27 |
|
MLA015-FAH |
25x4 |
0.12 |
0.16 |
0.19 |
20~2000 |
0.3~1 (3~10kgf/cm²) |
0.29 |
0.25 |
0.27 |
|
MLA03
|
25x4 |
0.2 |
0.28 |
0.32 |
20~2000 |
0.3~1 (3~10kgf/cm²) |
0.29 |
0.25 |
0.27 |
AMI-300 202035 202036 |
MLA05 |
60x2 |
0.2 |
0.5 |
0.6 |
20~2000 |
0.3~1.5 (3~15kgf/cm²) | 0.4 |
0.4 |
0.4 |
ACM-II 102486 102484 |
MLA05-5 |
25x4 |
0.36 |
0.5 |
0.57 |
20~500 |
0.3~0.5 (3~5kgf/cm²) |
0.29 |
.25 |
0.27 |
|
MLA10 |
200x4 |
0.662 |
0.96 |
1.16 |
20~1000 |
0.5~1.5 (5~15kgf/cm²) |
1.34 |
1.12 |
1.17 |
AMI-1000 202132 202131 202275 |
MLA15 |
200x4 |
0.984 |
1.43 |
1.72 |
20~1000 |
0.5~1.5 (5~15kgf/cm²) |
1.34 |
1.12 |
1.17 |
|
MLA30 |
400x4 |
2.19 |
3.18 |
3.83 |
20~1000 |
0.5~1.5 (5~15kgf/cm²) |
2.2 |
1.93 |
1.95 |
|
MLA50 |
400x4 |
3.64 |
5.28 |
6.37 |
20~1000 |
0.5~1.5 (5~15kgf/cm²) |
2.2 |
1.93 |
1.95 |
|
MLA70 |
750x4 |
5.03 |
7.29 |
8.80 |
20~1000 |
0.5~1.5 (5~15kgf/cm²) |
3.6 |
3.3 |
3.2 |
|
MLA100 |
750x4 |
7.25 |
10.51 |
12.69 |
20~1000 |
0.5~1.5 (5~15kgf/cm²) |
3.6 |
3.3 |
3.2 |
|
Home | American parts | Foreign (metric) parts | Contact us | Devco-Showa | Bijur | Vogel / Willy Vogel | Lube Corp | Trabon
|