|
|
  
    
Positive Displacement Injectors (For PDI Systems)
 |
Positive Displacement Injectors (PDI's) are used with PDI Gear Pumps such as the Trico PE Type. Each injector has a specific output (cc) amount which it discharges when the system reaches the required pressure.
|
Manifold Part Number |
Manifold Dimensions (mm) |
Injector Output Thread |
Manifold Inlet Thread |
Output Volume (cc/cycle) |
Number of Outlet Ports |
| A |
B |
PDM-42 |
50 |
39 |
M8x1 |
1/8 BSPT |
0.06, 0.10, 0.16, 0.20, 0.30 or 0.50 are all possible outputs. |
2 |
PDM-43 |
65 |
54 |
3 |
PDM-44 |
80 |
69 |
4 |
PDM-45 |
95 |
84 |
5 |
PDM-46 |
110 |
99 |
6 |
 Click on Image for Larger View
|
Specifactions |
| Operating Pressure |
200 PSI |
| Pump Required |
Gear Pump |
| PDI Selection Chart |
| Part Number |
Out Volume (cc/cycle) |
| PDI-06 |
0.06 |
| PDI-10 |
0.10 |
| PDI-16 |
0.16 |
| PDI-20 |
0.20 |
| PDI-30 |
0.30 |
| PDI-50 |
0.50 |
|
Home | American parts | Foreign
(metric) parts | Contact us
©2003 Devco Corporation. All rights reserved.
Devco is a registered trademark of Devco Corporation. All other brands
or products names, marks and logos are trademarks or registered trademarks
of their respective companies.
|
